Yardistry YM11635 Instalační příručka stáhnout pdf (Strana 25)

25 [email protected]

It is important the proper hardware gets

placed in the places shown. Make sure

you install the Wafer Bolt rst and then

the wood screws.

A: Attach one (195) Arch Beam Front in

between two Corner Post Assemblies as

shown in g. 10.2 and attach to Corner

Post Assembly with one 1/4 x 4-1/4” Wafer

Bolt (with 5/16” at washer); and one 1/4

x 3-3/4” Wafer Bolt (with 5/16” at washer

and 1/4” connector nut) per side. (g. 10.1)

B: Attach three #8 x 3” wood screws

per side.

C: Repeat for the opposite side.

Step 10: Attach Arch Beam Fronts

2 x (195) Arch Beam Front 38.1 x 241.3 x 3048 mm (2 x 6 x 120”)

HardwareWood Parts

Fig. 10.2

12 x #8 x 3” Wood Screw

4 x 1/4 x 4-1/4” Wafer Bolt (5/16” at washer, 1/4” connector nut)

4 x 1/4 x 3-3/4” Wafer Bolt (5/16” at washer, 1/4” connector nut)

Fig. 10.1

1/4 x 4-1/4”

Wafer Bolt

#8 x 3”

Wood

Screw

Flat

Washer

Corner of

Corner Post

Assembly

(195) Arch

Beam Front

(195) Arch

Beam Front

Outside

Panel Post

#8 x 3”

Wood

Screw

1/4 x 3-3/4”

Wafer Bolt

(195) Arch

Beam Front

Connector

Nut

Flat

Washer

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

Komentáře k této Příručce

Žádné komentáře

Yardistry YM11635 Instalační příručka Strana 25

Komentáře k této Příručce